PA Jeeps

The Garage => Technical Advice and Questions => Topic started by: Joe on May 21, 2008, 06:56:42 pm

Title: Dana 300
Post by: Joe on May 21, 2008, 06:56:42 pm

 Dana 300 +  95 YJ 4 cyl (auto)= ?

  I know I need to change output shafts, just wondering is it feasible?

Title: Re: Dana 300
Post by: crazy4ink on May 24, 2008, 07:47:26 pm

your dana 300 should have a 23 spline input and your tranny should have a 21 spline output.  Check with Novak and/or Advance Adapters.  They should have what you need.  Not sure, but you might be able to get a 6 cylinder auto tranny and swap the output shaft to what you need.