PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: sean1 on November 09, 2009, 10:09:07 pm
-
need to set up full hyro on my jeep. need help. never done anything like this. any advice?
-
Admitting that you have no experience with a project like this I'd like to ask a few questions first.
1) Will this Jeep be used strickly for off-road use...?
2) Will this Jeep be driven on the street from time to time...?
Understand that there are two ways to set-up a hydro system.
1) Full Hydro - Fully dependant on fluid and consists of eight key components needing installed correctly.
2) Ram Assist - Works to assist your existing system and quite simple to install with a kit.
A fully hydraulic system requires detail when installing. Whereas an assist system is quite easy.
Both will offer improved results. But, the fully hydro system is well known for strickly off-road use but when set up correctly is fully capable for street use.
Hell, Catapillar didn't spend millions to refine a system for the millions of heavy duty dump trucks out there for nothing. It just needs to be done correctly.
-
it will be strictly offroad. yeah i understand that some full hydro set ups depend solely on fluid to drive the system. like some of the old farm tractors. would like to try it but i do realize this is something that must be done correctly for my safety aswell as others.
-
Ok, now that you've decided that part.
Have you considered the cost...? It's not a cheap decision by any means and requires assistance to install if not knowledgeable.
1) Hydro Rams & Connecting Parts = $200-$220.00
2) Ram Mounting Kit = $100.00
3) Clevis Kit = $100.00
4) Orbital (Steering Control Valve) = $275
5) Above Mounting Kit = $20-$25.00
6) Steering Columns = $50-$60.00
7) Tie Rod Kit = $130-$140.00
8) Lines & Fittings = $20-$25.00
Total Investment without labor = $895.00-$945.00
Pretty BIG investment with NEW parts. People have done it for less with the abilities to improvise and aquire used parts.
No, I have never install one. I do understand how and why they work so damn well. I might have forgotten a fluid cooler too, I've seen some systems with those installed.
A "Ram Assist" system can be had with all needed compenents http://www.xtremeterrain.com/hydraulicassiststeeringkits.aspx
-
it is expensive fo rsure. but i am running 42" tsl's. would an assist system be enough?
-
They are rated for 40+ from what I understand. Let me ask around.