PA Jeeps

The Garage => Technical Advice and Questions => Topic started by: etaucher on April 09, 2010, 10:47:22 pm

Title: Tranny Question
Post by: etaucher on April 09, 2010, 10:47:22 pm

I just bought a 1990 Jeep Cherokee Sport with the 4.0L, Auto tranny, its the NON-HO tranny, I have a 1994 Jeep Cherokee auto HO tranny, will it fit on the NON-HO motor? Or is the tranny diff?

Title: Re: Tranny Question
Post by: hillbilly on April 09, 2010, 11:27:24 pm

if they are both the same style yes but the earlier trans had a dash board shift button on it, where the new ones dont. the switch is for comfort/power and the new trans is set just to power.

Title: Re: Tranny Question
Post by: etaucher on April 09, 2010, 11:43:15 pm

The 94 Tranny came out of a 4.0L HO-Motor, the 90 tranny is not HO, but is a 4.0L. I was just wondering if the torque converter and tranny would bolt up without any problems.

Title: Re: Tranny Question
Post by: etaucher on April 12, 2010, 09:29:11 pm

Alright the tranny and transfer case  out of the 1990 is 21 spline, and the tranny out of the 1994 is 23 spline, would I just be able to get a new intput shaft that is 23 spline, and change the 21 spline over to 23 on the transfer case?

*EDIT*

Alright I did some research and found this, http://4x4trailhunters.com/tech/read/20 If I get the parts, would someone be willing to change the parts over for me? Im willing to pay, I just need to know what it would cost to get it done.

Title: Re: Tranny Question
Post by: etaucher on April 17, 2010, 05:33:04 pm

Anyone willing to help me tear into this TC?

Title: Re: Tranny Question
Post by: MUDDY on April 17, 2010, 08:46:57 pm

CHANGE THE SPLINES OR JUST USE THE OTHER SHAFTS

Title: Re: Tranny Question
Post by: etaucher on April 17, 2010, 10:16:47 pm

I was told the 21 spline shaft out of the 1990 Tranny, wont bolt into the 1994 tranny.

Title: Re: Tranny Question
Post by: MUDDY on April 21, 2010, 06:40:20 am

when i mean use the other shafts. i mean the ds from the 94

Title: Re: Tranny Question
Post by: etaucher on April 21, 2010, 10:51:28 am

No, no, your not getting it, the Input shaft that goes into the back of the transmission is 21 spline, the shaft on the tranny is 23 spline, the transfer case wont bolt up to the back of the tranny.

Title: Re: Tranny Question
Post by: MUDDY on April 21, 2010, 11:27:20 am

sorry misunderstoud

Title: Re: Tranny Question
Post by: MUDDY on April 21, 2010, 06:39:56 pm

jeep parts (york)

--------------------------------------------------------------------------------
Date: 2010-04-21, 2:29PM EDT
Reply to: sale-a32ee-1703235471@craigslist.org [Errors when replying to ads?]

--------------------------------------------------------------------------------


I have a few jeep parts that need to go.
2 transfercase 1 87wrangler 231 (21 spline) and a 91Cherokee 231 (23 spline)
2 futura brand M/T tires with some tread left 31x10.5x15
2 87 wrangler bumperets
Bar type hitch w/out ball


Location: york

Title: Re: Tranny Question
Post by: etaucher on April 22, 2010, 10:26:30 am

Thanks I emailed him