PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: cklanish96zj on June 07, 2010, 05:07:43 pm
-
i am looking for some one in the central pa area to help me install ring and pinions in a dana 30 n 35 i am very mechanically incline but have never done a ring and pinion willing to travel and pay reasonable amount if any jeeper will help another jeeper please contact me thanks allot
-
before you start,do you have the specialty tools? id get an extra set of bearings, the axle and pinion. because if the trial and error needed to set the ring depth, backlash and side to side.
-
Your profile states Ramey Pa., Is this where the jeep is located?
I would recommend pulling the axles and do them on a workbench it is a lot easier then laying on the ground and give yourself plenty of time to do them correctly. Another idea is to get a free axle and set it up a few times, this really helped me do mine.There is a lot of info on the web but every thing you read in NOT always correct. It is not rocket science but has to be done right to be strong, quiet, and last a long time.
Ted