PA Jeeps

The Garage => Technical Advice and Questions => Topic started by: (Tattoo) Jack on August 22, 2011, 04:51:08 pm

Title: Transfer Case Yoke socket size...
Post by: (Tattoo) Jack on August 22, 2011, 04:51:08 pm

   What size socket do I need to remove the front output shaft Yoke off an 1996 231 T-Case?

   Thanks, Tatt

Title: Re: Transfer Case Yoke socket size...
Post by: hillbilly on August 22, 2011, 09:16:54 pm

not sure but i know i have one. if needed

Title: Re: Transfer Case Yoke socket size...
Post by: Rick_Bear on August 23, 2011, 12:06:27 pm

1 1/8"....?

Title: Re: Transfer Case Yoke socket size...
Post by: (Tattoo) Jack on August 23, 2011, 12:38:02 pm

   Thanks. I'll try and measure it, but I figured it would be nice to know ahead of.time cause I don't have that many large sockets, at least that size.

Title: Re: Transfer Case Yoke socket size...
Post by: Rick_Bear on August 24, 2011, 02:47:34 am

Should I bring my large set to the banquet to loan you...?

Title: Re: Transfer Case Yoke socket size...
Post by: (Tattoo) Jack on August 24, 2011, 03:45:12 am

   THANKS for the offer Rick, but Hillbilly lives just down the road from me so its less distance for me to travel to return them. I appreciate the offer.