PA Jeeps

The Garage => Technical Advice and Questions => Topic started by: Storman on January 20, 2012, 03:54:44 pm

Title: warn 9.5ti
Post by: Storman on January 20, 2012, 03:54:44 pm

Question, haven't needed to use my winch in a couple of years.  Plugged in the remote today and all it did was click and the light on the remote flashes.  Ideas are welcome

Title: Re: warn 9.5ti
Post by: CJ8Ted on January 21, 2012, 08:22:17 am

I would start by cleaning all the main (wire) connections. Sand paper and die-electric grease go along way. Get a little die-electric grease in the plug. Plug the plug in to the scocket a bunch of times, this cleans the pins.  Let us know how you make out.

Ted

Title: Re: warn 9.5ti
Post by: Storman on January 24, 2012, 06:26:05 pm

Thanks for the advice Ted, I'll let you know I hope to work on it this weekend as long as I can stay away from work

Title: Re: warn 9.5ti
Post by: Storman on January 28, 2012, 02:36:45 pm

Well all the connections were cleaned and i tried the die-grease still no luck.  I'll post what was wrong once I get it to Hoaks.

Title: Re: warn 9.5ti
Post by: hillbilly on January 28, 2012, 02:53:32 pm

i had one i burnt the relay out on it twice.

Title: Re: warn 9.5ti
Post by: Storman on February 27, 2012, 06:57:50 pm

And the winner is:  needs a new motor

still cheaper then a new winch.

Title: Re: warn 9.5ti
Post by: squazz on February 28, 2012, 10:24:21 am

Hoaks has had my WARN  for 3 weeks now  :'(