Author Topic: 88 YJ Question  (Read 9743 times)

STEVIESYJ

  • Jr. Member
  • *
  • Posts: 69
    • View Profile
88 YJ Question
« on: March 12, 2008, 09:12:19 pm »
I went a bought a second YJ (for the misses LOL) ::) and it's the older 4.2 6 Cyl.  My question is I don't know what trans or transfer case is under it.  Can any tell me?? I haven't taken the time to climb under it and read it.  Let me know and thanks in advance!!  ;D
Always a work in progress!!  Build, break, repeat!!
5" BDS lift 37"'s ARB Belly-Up Almost Done!!!! (For Now!!!)

jeppepl

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: 88 YJ Question
« Reply #1 on: March 13, 2008, 07:02:35 am »
Hi Steve,

My 89 has a AX15 and 231.
Chuck Landis
Jeepless for now!

obijon

  • Guest
Re: 88 YJ Question
« Reply #2 on: March 13, 2008, 07:32:36 am »
    well, the transfer case is either a np 207 or np 231 (check tag), and if its has a manual trans it's an ax15 after 3/89 or GOD FORBID a peugot BA10 if it was built before march 1989. so if its a side split clamshell case (trans comes apart into left and right sides) then sorry about your luck. i had one i my 87 and they are weak as hell - all its good for is a big paperweight or boat anchor. dont rebuild it, replace it w/an ax15 or nv3550 WHEN it goes, cause trust me it will go.

STEVIESYJ

  • Jr. Member
  • *
  • Posts: 69
    • View Profile
Re: 88 YJ Question
« Reply #3 on: March 13, 2008, 10:17:31 am »
its an automatic....
Always a work in progress!!  Build, break, repeat!!
5" BDS lift 37"'s ARB Belly-Up Almost Done!!!! (For Now!!!)

obijon

  • Guest
Re: 88 YJ Question
« Reply #4 on: March 13, 2008, 01:51:10 pm »
lucky you...it's a TF999.

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: 88 YJ Question
« Reply #5 on: March 13, 2008, 11:38:28 pm »
Yeah, the 999 is a durable piece.
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

STEVIESYJ

  • Jr. Member
  • *
  • Posts: 69
    • View Profile
Re: 88 YJ Question
« Reply #6 on: March 14, 2008, 08:36:30 am »
Thank you guys, this is for the misses and I know the newer Yj's but not that informed about the older 4.2 Yj's....thanks.

And if I'm correct they are a dana 35 non C-clip correct??
Always a work in progress!!  Build, break, repeat!!
5" BDS lift 37"'s ARB Belly-Up Almost Done!!!! (For Now!!!)

jeppepl

  • Newbie
  • *
  • Posts: 38
    • View Profile
Re: 88 YJ Question
« Reply #7 on: March 14, 2008, 11:43:06 am »
Mine was the non C-clip.
Chuck Landis
Jeepless for now!

obijon

  • Guest
Re: 88 YJ Question
« Reply #8 on: March 14, 2008, 06:18:07 pm »
 Yup no clip - 87 to 89 didn't use them, only 90 and up.
 And to think my dad thought reading all those jeep books and magazines was a waste of time... ;D