Ok - oh those of great Jeep knowledge - my 98 XJ 4.0 automatic has developed an irritating noise - when I get hard on the gas (say I'm pulling away from an uphill traffic light) I'm getting a lot of vibration under the tranny tunnel - if I'm gentle on the gas - no noise - no vibes - my motor mounts are fine (did the old power brake it with the hood open test - the engine didn't move much at all) - I suspect the transmission mount on the cross member - does this sound reasonable and - short of dropping the cross member to see if the tranny mount drops out in multiple parts - is there a non-destructive way to test it?
I also noticed that it won't stay in low range 4WD - which again makes me suspect the mount is the culprit -
Thanks
Steve