« previous next »
Pages: [1]

Author Topic: clutch / shifting issues  (Read 6369 times)

benny

  • Newbie
  • *
  • Posts: 2
    • View Profile
clutch / shifting issues
« on: June 23, 2010, 07:27:10 pm »
I have a 2000 TJ SE w/ 2.5L manual 5 speed and no A/C.

The problem that with the engine running I am having is that it is extremely hard to shift into any gear.  The tranny is not grinding at all and the clutch does not feel to be slipping for any appreciable amount.

Now, if I turn the engine off, I can row thru all of the gears with no problems what so ever.

Originally I was thinking clutch, but now I am considering the master cylinder.  Any thoughts would be apprecaited.
-ken
Logged

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: clutch / shifting issues
« Reply #1 on: June 23, 2010, 07:32:23 pm »
check the fluid? if it was the master cylinder, there would be the same problem running or not. is there a vacuum assist on it?
Logged
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Davew

  • Full Member
  • **
  • Posts: 167
  • Jenn's On Board Mechanic
    • View Profile
Re: clutch / shifting issues
« Reply #2 on: June 23, 2010, 09:35:47 pm »
Could very well be the Master cylinder. can you see how much movement the slave cylinder has?
Logged
Stupidity, if left untreated is self-correcting

benny

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: clutch / shifting issues
« Reply #3 on: June 23, 2010, 11:47:28 pm »
I don't know if there is a vacuum assist, but the fluid level is fine w/ no drop in amount that would require replacement.

 Was not able to really see anything out of the ordinary, but I'll have to check the slave.
Logged
Pages: [1]
« previous next »