« previous next »
Pages: [1]

Author Topic: Blinker problem in CJ7  (Read 7697 times)

joe21228

  • Newbie
  • *
  • Posts: 9
    • View Profile
Blinker problem in CJ7
« on: August 10, 2009, 08:03:32 am »
Driver side blinker stays constant when I turn on signal. Replaced all the bulbs; front, side, and rear. Made sure to get a good ground in the back. Still nothing constant blinker when i put the blinker on.

Brake light does not work either. However, the rear taillights work when the lights are on. I am lost.

Any help would be appreciated.
Logged

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: Blinker problem in CJ7
« Reply #1 on: August 10, 2009, 09:53:02 am »
Welcome to the world of "wacky" CJ lighting issues....

Something is sending current back there when it shouldn't. It's not likely to be a ground problem because none of the supply wires at the tail llight are grounded when they're not hot.
Unplug the rear harness and test all of the wires on both sides of the plug with a 12-volt test light.
Logged
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

CJ8Ted

  • Hero Member
  • ****
  • Posts: 482
    • View Profile
Re: Blinker problem in CJ7
« Reply #2 on: August 10, 2009, 06:12:28 pm »
When my blinker stays on I go strate to my front grill those turn lights always give me a fit. The sockets are old and the whole thing is grounded with the screws that hold the cover on.

HTH
Ted
Logged
85' CJ8 on 33s w/ 4.56s

Jeremy

  • Full Member
  • **
  • Posts: 241
    • View Profile
Re: Blinker problem in CJ7
« Reply #3 on: September 23, 2009, 02:52:55 pm »
I second the front grill for lighting issues,  shine up the metal where all those mounting screws are,. double check the light bulbs.  and look for  broken installation. 
Logged
Jeremy Meehan
Pages: [1]
« previous next »