« previous next »
Pages: [1]

Author Topic: body lift  (Read 9610 times)

Peyton

  • Jr. Member
  • *
  • Posts: 82
  • my boy and my cj 7
    • View Profile
body lift
« on: January 21, 2013, 04:26:21 pm »
How hard is it to install new body spacer ?
Logged
Peyton

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: body lift
« Reply #1 on: January 22, 2013, 04:52:08 pm »
do you have the same size spacer in there already or are you talking installing a body lift?
Logged
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: body lift
« Reply #2 on: January 23, 2013, 04:34:49 am »
As long as all the bolts come out it's a somewhat easy job to install a body life.

LUBRICATE THE BOLTS...LUBRICATE THE BOLTS...LUBRICATE THE BOLTS
Logged
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

Peyton

  • Jr. Member
  • *
  • Posts: 82
  • my boy and my cj 7
    • View Profile
Re: body lift
« Reply #3 on: January 23, 2013, 06:17:45 pm »
Iv been having a major problem with my tj just wants to follow the road I recently found out by rick thanks by the way I shouldnt have 4 in body life. I m removing it and dropping it down to a 2 in lift. The only question I have is I ordered and installed new bilstien shocks will I have to order new shocks when I lower it..
Thanks
Dave
Logged
Peyton

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: body lift
« Reply #4 on: January 24, 2013, 03:54:03 pm »
You should be ok...Change out the body lift and see how things are. I doubt there will be a problem unless they are extremely long.
Remember that a shock absorber is to stop "UP" travel more than "down" travel.

Technically you could drive on the street if you had to without them. But, off-road if you flex "up" to a point the coil springs would fall out.
Logged
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

Peyton

  • Jr. Member
  • *
  • Posts: 82
  • my boy and my cj 7
    • View Profile
Re: body lift
« Reply #5 on: January 24, 2013, 06:03:06 pm »
Rick I think I only have around 4 inches of the shock rod showing do you think that still be ok
Logged
Peyton

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: body lift
« Reply #6 on: January 25, 2013, 04:11:33 am »
Should be fine.
Logged
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

Rubicon_Ryan

  • Newbie
  • *
  • Posts: 44
  • '05 Rubicon
    • View Profile
Re: body lift
« Reply #7 on: February 02, 2013, 07:38:49 pm »
Ran across this video today.  I'm about to install a 1" Daystar BL.  This made it a lot less intimidating.

http://www.youtube.com/watch?v=mVaKjN8bwnk

Hopefully this helps you do it yourself!
Logged
Pages: [1]
« previous next »