Author Topic: What did you do to your Jeep today?  (Read 812049 times)

3gear

  • Newbie
  • *
  • Posts: 6
  • Marc "Private"
    • View Profile
Re: What did you do to your Jeep today?
« Reply #960 on: March 07, 2011, 09:24:48 am »
I installed my new shocks and cat back exhaust!!!  Now I know why everyone says to use anti-sieze LOL LOL  Great way to spend a Saturday!!! 
For me, it is far better to grasp the Universe as it really is than to persist in delusion, however satisfying and reassuring... Carl Sagan

 I'll gladly email any of you my last name, I am not exposing personal information unnecessarily, already had 1 Jeep stolen, a Cherokee but stolen is stolen..

locojipr

  • Jr. Member
  • *
  • Posts: 76
    • View Profile
Re: What did you do to your Jeep today?
« Reply #961 on: March 07, 2011, 12:43:01 pm »
Put 2 new tranny lines on,  oil change ,  and rotated the tires!
Tim McClincy ---2007 JK 2door  Wrangler... Zone 3" lift...33" Hankook Dynapro MT...MB Chaos wheels...4.10s....XRC8 winch

2012 Unlimited JK Wrangler---32" Maxxis BigHorn tires---Black Aluminum Procomp wheels- (wife's daily driver)

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: What did you do to your Jeep today?
« Reply #962 on: March 21, 2011, 02:49:23 pm »
new driveshaft in and ready to go even fixed some odd ball noises from under the jeep,   and the wife decided the chrome hitch ball was too shiny and tried to cover it with some black paint, unfortunately it was from some elses door.  ::)
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

squazz

  • Jr. Member
  • *
  • Posts: 64
  • Flexable
    • View Profile
Re: What did you do to your Jeep today?
« Reply #963 on: March 21, 2011, 11:33:56 pm »
Finley got that 5.5" IRO Long Arm on this past week
98 Zj                    93 Zj                        94 Zj         
  5.9L 46re              4.0L Ax-15          Gone But not forgotten
1"+ Up County    5.5" IRO front          
                        Clayton rear long arms


¯\[°_o]/¯ Charles Howard

squazz

  • Jr. Member
  • *
  • Posts: 64
  • Flexable
    • View Profile
Re: What did you do to your Jeep today?
« Reply #964 on: March 23, 2011, 02:25:15 am »
Ordered Drive shaft from Quigley's for said 5 speed ZJ
98 Zj                    93 Zj                        94 Zj         
  5.9L 46re              4.0L Ax-15          Gone But not forgotten
1"+ Up County    5.5" IRO front          
                        Clayton rear long arms


¯\[°_o]/¯ Charles Howard

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: What did you do to your Jeep today?
« Reply #965 on: March 23, 2011, 10:54:58 am »
Not today, but I ordered bead locking rims last week. Fired the CJ up and have her off the trailer. Broke the lug nuts loose and am waiting for the rims to arrive then I'll haul the tires to Adventurous 4x4 in Hagerstown, MD to have them mounted. I'm getting back on the trail this year.
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

squazz

  • Jr. Member
  • *
  • Posts: 64
  • Flexable
    • View Profile
Re: What did you do to your Jeep today?
« Reply #966 on: March 23, 2011, 08:33:16 pm »
and installed DS still need to upgrade steering, bleed brakes, fill TC and get alignment be able to make my maiden voyage @ rousch creek soon
98 Zj                    93 Zj                        94 Zj         
  5.9L 46re              4.0L Ax-15          Gone But not forgotten
1"+ Up County    5.5" IRO front          
                        Clayton rear long arms


¯\[°_o]/¯ Charles Howard

chasm

  • Hero Member
  • ****
  • Posts: 1045
  • Blonde / Bomber...
    • View Profile
    • JeepChasm
Re: What did you do to your Jeep today?
« Reply #967 on: March 25, 2011, 11:58:30 am »
Fixed the exhaust system (again) on the YJ so I can get back on the trails!  ;D

Cut 3" off the end of the tail pipe so (hopefully) I won't keep mashing it. Also have re-welded the stainless steel muffler inlet and outlet pipes so it will pass PA inspection.

"Old Yeller is going to get some attention under the hood next!
Mike Hardesty aka: "chasm"
'51 CJ3A: Restored Garage Queen
'83 CJ8 Scrambler: To Do List...
'93 YJ: 2.5" R.E. lift, 31" Swamper SSR's, Olympic Rock bumper, smashed Stainless exhaust, U-bolt skids, Warn M-8000 winch.
'08 Liberty: (wife's DD)

(Tattoo) Jack

  • Hero Member
  • ****
  • Posts: 810
  • Jack Utter
    • View Profile
Re: What did you do to your Jeep today?
« Reply #968 on: March 25, 2011, 01:02:55 pm »
  Having a new DS made at Quigley's, the center section (bowl or whatever) of the Double Cardon was REALLY bad. Fixing it was about $50 less then a new one soooooo...

  Also have Rusty's Steering Conversion Tie Rod kit. I already had one side of my (stock) Tie Rod ""Flipped"", I'll Flip the other side and install this on the Top Sides of my Knuckles, then no more (hopefully) dealings with Tie Rod end troubles. Flip Insert   is from Goferit Products  goferitoffroad.com/products.htm   I'll have to get this stuff done soon... Hmmmmm Blacks All Day  ;D

The only way to know your limits...  is to surpass them!


                    Don't Shop - Adopt
   "Save Your Best Friends Life, Adopt a Rescue"
       If it's not a Dobermann, it's just a Dawg...

squazz

  • Jr. Member
  • *
  • Posts: 64
  • Flexable
    • View Profile
Re: What did you do to your Jeep today?
« Reply #969 on: March 30, 2011, 11:54:23 pm »
Did some front fender trimming gonna see how long i can go before getting hassled by the PA law enforcement for not having fender flares
cant wait to get it muddy


also dipstick tube broke and i could not get it out so JBweld FTW
98 Zj                    93 Zj                        94 Zj         
  5.9L 46re              4.0L Ax-15          Gone But not forgotten
1"+ Up County    5.5" IRO front          
                        Clayton rear long arms


¯\[°_o]/¯ Charles Howard

MUDDY

  • Sr. Member
  • ***
  • Posts: 263
  • Jon Vasellas
    • View Profile
Re: What did you do to your Jeep today?
« Reply #970 on: April 02, 2011, 03:21:22 pm »
BLOW THE FRT. DRIVE SHAFT APART ON THE ZJ
PUT NEW BATTERY IN 95XJ
NEW ALT AND BELT PLUS POWERSTEERING PUMP IN THE 88XJ
GOT TO INSTALL WIPER MOTOR AGAIN IN 88
98 grand cherokee mild liFT
97 CHEVY 3IN LIFT

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: What did you do to your Jeep today?
« Reply #971 on: April 02, 2011, 08:32:05 pm »
moved the cj to get some pics for the newsletter and proceeded to mangle the bumper on the wifes xj, about ripped it off, oops.
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Scott Gibson

  • Full Member
  • **
  • Posts: 120
    • View Profile
Re: What did you do to your Jeep today?
« Reply #972 on: April 02, 2011, 08:53:02 pm »
I have some xj bumpers layin around Hillbilly if you need one.

squazz

  • Jr. Member
  • *
  • Posts: 64
  • Flexable
    • View Profile
Re: What did you do to your Jeep today?
« Reply #973 on: April 03, 2011, 10:57:23 pm »
I have some xj bumpers layin around Hillbilly if you need one.
any aftermarket ZJ bumpers laying around ;D

on topic: i installed a hand throttle today
98 Zj                    93 Zj                        94 Zj         
  5.9L 46re              4.0L Ax-15          Gone But not forgotten
1"+ Up County    5.5" IRO front          
                        Clayton rear long arms


¯\[°_o]/¯ Charles Howard

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: What did you do to your Jeep today?
« Reply #974 on: April 04, 2011, 09:35:36 am »
Well...
Having ordered five Racline Bead Locking Rims we mounted up four on Saturday. One was the wrong color  >:(...going back
Once I got home with them in the back of my truck two of the four were leaking air around the ring  >:( >:(

So, I had to break those two down...40 bolts each...to have them returned as well.  >:( >:( >:(
Randy and I will get it worked out with Raceline...Should have three rims shipped this week at their cost.

Randy feels they were not machined correctly and I have to agree.
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...