« previous next »
Pages: [1]

Author Topic: quadratrac dump  (Read 7544 times)

dave

  • Newbie
  • *
  • Posts: 35
    • View Profile
quadratrac dump
« on: October 15, 2010, 10:15:25 pm »
So I have a 79 CJ7 that was quadratrac.  Rear went bad so I already replaced both rears from a non-qtrack jeep.

Was gonna ditch the 400 trans and swap in something else with a 300 transfer case but the tranny actually worked well.

I know some old wagoneers had the 400 tranny with a dana 20.

Does anyone know if one of these  or any dana 20 cases would bolt up to mine.   I know I can get an adapter to bolt on a 300 but I really don't want to lay out the coin if I can help it.

Any input appreciated.
Logged

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: quadratrac dump
« Reply #1 on: October 16, 2010, 10:29:27 am »
i have the same issue and from what ive fingered out is the dana 20 bolts up but rick or jeremy or... know ALOT more than me.
Logged
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: quadratrac dump
« Reply #2 on: October 16, 2010, 08:10:53 pm »
watcha gonna do with the quadratrac tcase?   thanks tad
Logged
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

dave

  • Newbie
  • *
  • Posts: 35
    • View Profile
Re: quadratrac dump
« Reply #3 on: October 16, 2010, 10:58:01 pm »
I will most likely sell it off .

I just need to find out for sure if a dana 20 will bolt up .

And if so will the one I have out of a 79 CJ work or do I need to find one from an old wagoneer?

Logged
Pages: [1]
« previous next »