Author Topic: warn 9.5ti (Read 11123 times)

Storman · « **on:** January 20, 2012, 03:54:44 pm »

Question, haven't needed to use my winch in a couple of years. Plugged in the remote today and all it did was click and the light on the remote flashes. Ideas are welcome

CJ8Ted · « **Reply #1 on:** January 21, 2012, 08:22:17 am »

I would start by cleaning all the main (wire) connections. Sand paper and die-electric grease go along way. Get a little die-electric grease in the plug. Plug the plug in to the scocket a bunch of times, this cleans the pins. Let us know how you make out.

Ted

Storman · « **Reply #2 on:** January 24, 2012, 06:26:05 pm »

Thanks for the advice Ted, I'll let you know I hope to work on it this weekend as long as I can stay away from work

Storman · « **Reply #3 on:** January 28, 2012, 02:36:45 pm »

Well all the connections were cleaned and i tried the die-grease still no luck. I'll post what was wrong once I get it to Hoaks.

hillbilly · « **Reply #4 on:** January 28, 2012, 02:53:32 pm »

i had one i burnt the relay out on it twice.

Storman · « **Reply #5 on:** February 27, 2012, 06:57:50 pm »

And the winner is: needs a new motor

still cheaper then a new winch.

squazz · « **Reply #6 on:** February 28, 2012, 10:24:21 am »

Hoaks has had my WARN for 3 weeks now

PA Jeeps

News:

Author Topic: warn 9.5ti (Read 11123 times)

Storman

warn 9.5ti

CJ8Ted

Re: warn 9.5ti

Storman

Re: warn 9.5ti

Storman

Re: warn 9.5ti

hillbilly

Re: warn 9.5ti

Storman

Re: warn 9.5ti

squazz

Re: warn 9.5ti