« previous next »
Pages: [1]

Author Topic: weber carb install on CJ7  (Read 8767 times)

Joe86CJ7

  • Newbie
  • *
  • Posts: 6
    • View Profile
weber carb install on CJ7
« on: February 08, 2012, 10:51:11 am »
bought a brand new weber carb for my 86 CJ7 258 I6 having problems getting the thing adjusted.  have adjusted the mixture screw over and over and cannot get the thing to run right, has no power just seems like it is not getting enough fuel, replaced fuel filter, checked timing and plugs, wondering if maybe it needs bigger jets.
Logged
Joe Brown

locojipr

  • Jr. Member
  • *
  • Posts: 76
    • View Profile
Re: weber carb install on CJ7
« Reply #1 on: February 08, 2012, 08:08:54 pm »
there are 2 adjustment screws turn the bottom one all the way in and then 1 1/2 turns out that will be real close just may need to fine tune it from there.
Logged
Tim McClincy ---2007 JK 2door  Wrangler... Zone 3" lift...33" Hankook Dynapro MT...MB Chaos wheels...4.10s....XRC8 winch

2012 Unlimited JK Wrangler---32" Maxxis BigHorn tires---Black Aluminum Procomp wheels- (wife's daily driver)

Jeremy

  • Full Member
  • **
  • Posts: 241
    • View Profile
Re: weber carb install on CJ7
« Reply #2 on: February 10, 2012, 08:52:14 pm »
are you running a fuel pressure regulator,  it is mandatory or it will NEVER be right!  Adjust it to 2-3 .lbs of pressure.  Then as mentioned it is about one and half turns out.
Logged
Jeremy Meehan
Pages: [1]
« previous next »